Uplinking your Flight Plan to a Datalink Provider

To uplink your flight plan to any third-party datalink provider first your airplane profile should be set up through our Customer Care Center to your chosen provider. After that has been completed, follow the steps below. 

To uplink your flight plan to ARINC Direct, first create and calculate your flight plan, then under Flight Plan Summary select 1 Send to ARINC.

Then on the pop-up box, select 2 Send to send your flight plan. 

You will then see a confirmation message that your flight plan has been sent to ARINC Direct. 

To uplink your flight plan to GDC (Global Data Center) for Honeywell, first, create and calculate your flight plan then under Flight Plan Summary select 3 Send to GDC.  

Then you select 4 Send to send your flight plan to GDC. 

You will then see a confirmation message that your flight plan has been sent to GDC. 

Note: If you are connected to Satcom Direct for your datalink services it will automatically uplink your flight plan after it's been created and calculated in the flight planning system. 

Next: Calculate Flight Plans for Alternate Airports in Flight Planning >